Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 760

Selection Criteria
Slot/Port - Select the physical interface for which you want to display or configure data. Select 'All' to
set the parameters for all ports to the same values.
Configurable Data
Traffic Class - Specify which internal traffic class to map the corresponding 802.1p priority.
Non-Configurable Data
802.1p Priority - Displays the 802.1p priority to be mapped.
Command Buttons
Submit - Update the switch with the values on this screen. If you want the switch to retain the new
values across a power cycle, you must perform a save.
11.3.21 Managing Port Security
11.3.21.1 Configuring Port Security Administration Mode Page
Selection Criteria
Port Security Mode - Enables or disables the Port Security feature.
Command Buttons
Submit - Applies the new configuration and causes the changes to take effect. These changes will
not be retained across a power cycle unless a save configuration is performed.
- 760 -