Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 186

Display Message
Administrative Mode: This field indicates whether the administrative mode of SSH is enabled or
disabled.
Protocol Levels: The protocol level may have the values of version 1, version 2, or both versions.
SSH Sessions Currently Active: This field specifies the current number of SSH connections.
Max SSH Sessions Allowed: The maximum number of inbound SSH sessions allowed on the
switch.
SSH Timeout: This field is the inactive timeout value for incoming SSH sessions to the switch.
Keys Present: Indicates whether the SSH RSA and DSA key files are present on the device.
Key Generation in Progress: Indicates whether RSA or DSA key files generation is currently in
progress.
7.3.8.2 ip ssh
This command is used to enable SSH.
Syntax
ip ssh
no ip ssh
no - This command is used to disable SSH.
Default Setting
Disabled
Command Mode
Global Config
7.3.8.3 ip ssh protocol
This command is used to set or remove protocol levels (or versions) for SSH. Either SSH1 (1), SSH2 (2),
or both SSH 1 and SSH 2 (1 and 2) can be set.
Syntax
ip ssh protocol <protocollevel1> [protocollevel2]
<protocollevel1 - 2> - The protocol level can be set to SSH1, SSH2 or to both SSH 1 and SSH 2.
Default Setting
SSH1 and SSH2
- 186 -