Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 303

Hide thumbs Also See for FortiSwitch-548B v. 5.2.0.2:
Table of Contents

Advertisement

no - This command sets Minimum TCP Header Size Denial of Service protection to the default value
of disabled.
Default Setting
Disabled, 20
Command Mode
Global Config
7.13.2.3 dos-control firstfrag
This command enables IP First Fragment Denial of Service protection. If the mode is enabled, Denial of
Service prevention is active for this type of attack. If packets ingress having IP First Fragment Offset
equal to one (1), the packets will be dropped if the mode is enabled.
Syntax
dos-control firstfrag
no dos-control firstfrag
no - This command disabled IP First Fragment Denial of Service protection.
Default Setting
Disabled
Command Mode
Global Config
7.13.2.4 dos-control tcpflag
This command enables TCP Flag Denial of Service protections. If the mode is enabled, Denial of
Service prevention is active for this type of attacks. If packets ingress having TCP Flag SYN set and a
source port less than 1024 or having TCP Control Flags set to 0 and TCP Sequence Number set to 0 or
having TCP Flags FIN, URG, and PSH set and TCP Sequence Number set to 0 or having TCP Flags
SYN and FIN both set, the packets will be dropped if the mode is enabled.
Syntax
dos-control tcpflag
no dos-control tcpflag
no - This command sets disables TCP Flag Denial of Service protections.
- 303 -

Advertisement

Table of Contents
loading

Table of Contents