Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 596

Default Setting
Disabled
Command Mode
Router OSPFv3 Config.
10.4.2.37 redistribute
This command configures the OSPFv3 protocol to allow redistribution of routes from the specified
source protocol/routers.
Syntax
redistribute {static | connected} [metric <0-16777214>] [metric-type {1 | 2}] [tag <0-4294967295>]
no redistribute { static | connected} [metric] [metric-type] [tag]
<0-16777215> - The range of metric is 0 to 16777214.
<0-4294967295> - The range of tag is 0 to 4294967295.
Default Setting
Metric is unspecified.
Type is 2.
Tag is 0.
Command Mode
Router OSPFv3 Config
10.4.2.38 router-id
This command sets a 4-digit dotted-decimal number uniquely identifying the router ospf id.
Syntax
router-id <ipaddress>
<ipaddress> - IP Address.
Default Setting
None
Command Mode
Router OSPFv3 Config
- 596 -