Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 245

Number of Named Accounting Server Groups: The number of configured named RADIUS server
groups.
Number of Retransmits: The configured value of the maximum number of times a request packet is
retransmitted.
Time Duration: The configured timeout value, in seconds, for request re-transmissions.
RADIUS Accounting Mode: A global parameter to indicate whether the accounting mode for all the
servers is enabled or not.
RADIUS Attribute 4 Mode: A global parameter to indicate whether the NAS-IP-Address attribute
has been enabled to use in RADIUS requests.
RADIUS Attribute 4 Value: A global parameter that specifies the IP address to be used in the
NAS-IP-Address attribute to be used in RADIUS requests.
7.8.1.12 show radius accounting
This command is used to display the configured RADIUS accounting mode, accounting server, and the
statistics for the configured accounting server.
Syntax
show radius accounting [statistics {<ipaddr|hostname>}]
<ipaddr> - is an IP Address.
Default Setting
None
Command Mode
Privileged Exec
Display Message
If you do not specify any parameters, then only the accounting mode and the RADIUS accounting
server details are displayed.
RADIUS Accounting Mode: Enabled or disabled
IP Address: The configured IP address of the RADIUS accounting server
Port: The port in use by the RADIUS accounting server
Secret Configured: Yes or No
If the optional token 'statistics <ipaddr>' is included, the statistics for the configured RADIUS
accounting server are displayed. The IP address parameter must match that of a previously
configured RADIUS accounting server. The following information regarding the statistics of the
RADIUS accounting server is displayed.
RADIUS Accounting Server IP Address: IP Address of the configured RADIUS accounting server
- 245 -