Table of Contents
Advertisement
Command Mode
Privileged Exec
Display Message
The following fields are displayed as a table when <slot/port> is specified.
Group Address: The address of the multicast group.
Interface: Interface through which the multicast group is reachable.
Up Time: Time elapsed in hours, minutes, and seconds since the multicast group has been known.
Expiry Time: Time left in hours, minutes, and seconds before the entry is removed from the MLD
membership table.
When <group-address> is specified, the following fields are displayed for each multicast group and
each interface.
Interface: Interface through which the multicast group is reachable.
Group Address: The address of the multicast group.
Last Reporter: The IP Address of the source of the last membership report received for this
multicast group address on that interface.
Filter Mode: The filter mode of the multicast group on this interface. The values it can take are
include and exclude.
Version 1 Host Timer: The time remaining until the router assumes there are no longer any MLD
version-1 Hosts on the specified interface.
Group Compat Mode: The compatibility mode of the multicast group on this interface. The values it
can take are MLDv1 and MLDv2
9.3.1.2
show ipv6 mld interface [<slot/port>]
Use this command to display MLD-related information for the interface.
Syntax
show ipv6 mld interface [<slot/port>]
Default Setting
None
Command Mode
Privileged Exec
Display Message
The following information is displayed for each of the interfaces or for only the specified interface.
Interface: The interface number in unit/slot/port format.
MLD Mode: Displays the configured administrative status of MLD.
Operational Mode: The operational status of MLD on the interface.
- 508 -
Advertisement
Table of Contents
