Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 608

Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
RP: The IP address of the RP for the group specified.
Origin: Indicates the mechanism (BSR or static) by which the RP was selected.
10.7.1.6 show ipv6 pimsm rp mapping
Use this command to display all group-to-RP mappings of which the router is a aware (either configured
or learned from the bootstrap router (BSR)). If no RP is specified, all active RPs are displayed.
Syntax
show ipv6 pimsm rp mapping [rp address]
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
RP Address: This field displays the IP address of the RP.
Type: Indicates the mechanism (BSR or static) by which the RP was selected.
10.7.2 Configuration Commands
10.7.2.1 ipv6 pimsm
This command sets administrative mode of PIM-SM multicast routing across the router to enabled. MLD
must be enabled before PIM-SM can be enabled.
Syntax
ipv6 pimsm
no ipv6 pimsm
- 608 -