Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 373

Command Mode
Class-Map Config
7.21.2.20 match dstip6
This command adds to the specified class definition a match condition based on the destination IPv6
address of a packet.
Syntax
match dstip6 <destination-ipv6-prefix/prefix-length>
Default Setting
None
Command Mode
IPv6-Class-Map Config
7.21.2.21 match srcip6
This command adds to the specified class definition a match condition based on the source IP address
of a packet.
Syntax
match srcip6 <source-ipv6-prefix/prefix-length>
Default Setting
None
Command Mode
IPv6-Class-Map Config
7.21.2.22 match ip6flowlbl
This command adds to the specified class definition a match condition based on the IPv6 flow label
value.
Syntax
match ip6flowlbl <0- 1048575>
- 373 -