Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 857

11.5.3 Defining TACACS+ Configuration
11.5.3.1 Configuring TACACS Configuration Page
Configurable Data
Key String - Specifies the authentication and encryption key for TACACS+ communications
between the device and the TACACS+ server. The valid range is 0-128 characters. The key must
match the key configured on the TACACS+ server.
Connection Timeout - The maximum number of seconds allowed to establish a TCP connection
between the device and the TACACS+ server.
Encrypted - When the secret string is encrypted, this box need to be checked. This field is only
displayed if the user has READWRITE access.
Command Buttons
Submit - Send the updated screen to the switch and cause the changes to take effect on the switch
but these changes will not be retained across a power cycle unless a save is performed.
11.5.3.2 Configuring TACACS+ Server Configuration Page
Selection Criteria
TACACS+ Server Selects the TACACS+ server for which data is to be displayed or configured. If
the add item is selected, a new TACACS server can be configured.
Configurable Data
- 857 -