Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 962

Command Buttons
Submit - Send the updated configuration to the router. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
11.9.3.2 Viewing PIM-SM Global Status Page
Non-Configurable Data
PIMSM Admin Mode - The administrative status of PIM-SM in the router: either enable or disable.
Data Threshold Rate - The minimum source data rate in K bits/second above which the last-hop
router will switch to a source-specific shortest path tree.
Register Threshold Rate - The minimum source data rate in K bits/second above which the
Rendezvous Point router will switch to a source-specific shortest path tree.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.
11.9.3.3 Configuring PIM-SM SSM Range Configuration Page
Configurable Data
Group Address/Prefix Length - Enter the source-specific multicast group ip-address / Prefix
Length.
Delete - Attempts to remove the specified SSM Group Address for the PIM-SM router. Configuration
changes take effect immediately. These changes will not be retained across a power cycle unless a
save is performed.
- 962 -