Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 20

copy <url> startup-config <filename> Sets the download datatype to be an image or
3.5.8 Quick Start up Factory Defaults
Table 2-8 Quick Start up Factory Defaults
Command
clear config
copy running-config startup-config
[filename]
reload
config file.
The URL must be specified as:
tftp://ipAddr/filepath/fileName.
The startup-config option downloads the
config file using tftp and image option
downloads the code file.
Details
Enter yes when the prompt pops up to clear all
the configurations made to the switch.
Enter yes when the prompt pops up that asks
if you want to save the configurations made to
the switch.
Enter yes when the prompt pops up that asks
if you want to reset the system.
You can reset the switch or cold boot the
switch; both work effectively.
- 20 -