Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 584

10.4.2.12 area default-cost
This command configures the monetary default cost for the stub area. The operator must specify the
area id and an integer value between 1-16777215.
Syntax
area <areaid> default-cost <1-16777215>
<areaid> - Area ID.
Default Setting
None
Command Mode
Router OSPFv3 Config
10.4.2.13 area nssa
This command configures the specified areaid to function as an NSSA.
Syntax
area <areaid> nssa
no area <areaid> nssa
<areaid> - Area ID.
no - This command disables nssa from the specified area id.
Default Setting
None
Command Mode
Router OSPFv3 Config
10.4.2.14 area nssa default-info-originate
This command configures the metric value and type for the default route advertised into the NSSA. The
optional metric parameter specifies the metric of the default route and is to be in a range of 1-16777214.
If no metric is specified, the default value is 10. The metric type can be comparable (nssa-external 1) or
non-comparable (nssa-external 2).
- 584 -