Qos Menu - Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual

11.6.9.4 Configuring RIPv6 Route Redistribution Summary Page
This screen displays the RIPv6 Route Redistribution Configurations.
Non-Configurable Data
Source - The Source Route to be Redistributed by RIPv6.
Metric - The Metric of redistributed routes for the given Source Route. Displays "Unconfigured"
when not configured.
Command Buttons
Refresh - Displays the latest RIPv6 Route Redistribution Configuration data.
11.7

QOS Menu

11.7.1 Managing Access Control Lists
11.7.1.1.1 Configuring IP Access Control List Configuration Page
An IP ACL consists of a set of rules which are matched sequentially against a packet. When a packet
meets the match criteria of a rule, the specified rule action (Permit/Deny) is taken and the additional
rules are not checked for a match. On this menu the interfaces to which an IP ACL applies must be
specified, as well as whether it applies to inbound traffic. Rules for the IP ACL are specified/created
using the IP ACL Rule Configuration menu.
Selection Criteria
IP ACL - Make a selection from the pulldown menu. A new IP Access Control List may be created or
the configuration of an existing IP ACL can be updated.
- 893 -