Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 650

11.2.6.5 Configuring Multiple Port Mirroring Function Page
Selection Criteria
-
Session Select a port mirroring session from the list. The number of sessions allowed is platform
specific. By default the First Session is selected. Up to 1 sessions are supported.
- S
Mode pecifies the Session Mode for a selected session ID. The default Session Mode is disabled.
-
Destination Port
port(s). Default value is blank.
Configurable Data
- S
Source Port(s)
port(s) is sent to the probe port. Up to 20 source ports can be selected per session.
Command Buttons
Add Source Ports
Remove Source Ports
-
Submit Send the updated screen to the switch and cause the changes to take effect on the switch.
-
Delete Remove the selected session configuration.
Acts as a probe port and will receive all the traffic from configured mirrored
pecifies the source port(s) with directions as mirrored port(s). Traffic of the source
-
To add Source Port(s) to the selected session.
-
To remove the configured Source Port(s) of the selected session.
- 650 -