Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 146

Default Setting
50(LAN), 50(SAN)
Command Mode
Interface Config
7.2.17.8 queue ets pg-mapping
This command configures the mapping list of priority to priority groups. The range of priority id is from 0
to 7. The priority groups are LAN, SAN and IPC. This command let you assign priority id to specific
priority group. When the ETS is enabled, priority id 0 to 2 are assigned to LAN, priority 3 to 6 are
assigned to SAN, and priority 7 is assigned to IPC.
Syntax
queue ets pg-mapping {lan|san|ipc} [<0-7> [<0-7> [<0-7> [<0-7> [<0-7> [<0-7> [<0-7>]]]]]]]
no queue ets pg-mapping
<0 - 7> - Priority Id from 0 to 7.
lan - Sets ETS Priority Id to LAN priority group
san - Sets ETS Priority Id to SAN priority group
ipc - Sets ETS Priority Id to IPC priority group
no - This command restores the priority to priority group mapping list to default value.
Default Setting
Priority id 0 to 2 in LAN, 3 to 6 in SAN and 7 in IPC
Command Mode
Interface Config
7.2.18 Congestion Notification
7.2.18.1 show congestion-notify
This command displays CN function global parameter on system.
Syntax
show congestion-notify
- 146 -