Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 271

Command Mode
Privileged Exec
Display Message
Device Id: Identifies the device name in the form of a character string.
Entry Address(es): The addresses of the interface that has sent the update.
Platform: Describes the hardware platform name of the device, for example, Fortinet the L2 Network
Switch.
Capability: Describes the device's functional capability in the form of a device type, for example, a
switch.
Local Interface: The CDP neighbor information receiving port.
Port Id: Identifies the port on which the CDP packet is sent.
Holdtime: The length of time a receiving device should hold CDP information before discarding it.
Management Address: The first address of IP address which can use management address
connect to switch.
7.9.1.4 show cdp traffic
This command displays the CDP traffic counters information.
Syntax
show cdp traffic
Default Setting
None
Command Mode
Privileged Exec
Display Message
Incoming packet number: Received legal CDP packets number from neighbors.
Outgoing packet number: Transmitted CDP packets number from this device.
Error packet number: Received illegal CDP packets number from neighbors.
7.9.2 Configuration Commands
7.9.2.1 cdp
This command is used to enable CDP Admin Mode.
- 271 -