Table of Contents
Advertisement
Display Message
Number of Traps since last reset: The number of traps that have occurred since the last reset of
this device.
Trap Log Capacity: The maximum number of traps that could be stored in the switch.
Log: The sequence number of this trap.
System Up Time: The relative time since the last reboot of the switch at which this trap occurred.
Trap: The relevant information of this trap.
Trap log information is not retained across a switch reset.
i
7.5.1.4
show logging hosts
This command displays all configured logging hosts.
Syntax
show logging hosts
Default Setting
None
Command Mode
Privileged Exec
Display Message
Index: used for deleting.
IP Address:IP Address of the configured server.
Severity: The minimum severity to log to the specified address.
Port Server Port Number:This is the port on the local host from which syslog messages are sent.
Status: The state of logging to configured syslog hosts. If the status is disable, no logging occurs.
7.5.2
Configuration Commands
7.5.2.1
logging buffered
This command enables logging to in-memory log where up to 128 logs are kept.
- 224 -
Advertisement
Table of Contents
