Table of Contents
Advertisement
11.9.3.5 Viewing Interface's PIM-SM Summary Page
Selection Criteria
Slot/Port - Select the slot and port for which data is to be displayed. Slot 0 is the base unit.
Non-Configurable Data
Admin Mode - The administrative status of PIM-SM in the router: either enable or disable.
Protocol State - The operational state of the PIM-SM protocol on this interface.
IP Address - The IP address of the selected PIM interface.
Net Mask - The network mask for the IP address of the selected PIM interface.
Hello Interval (secs) - The frequency at which PIM Hello messages are transmitted on the selected
interface.
Join/Prune Interval - The frequency at which PIM Join/Prune messages are transmitted on this PIM
interface.
DR Priority - Indicates the DR priority on the PIM interface.
BSR Border - Specifies the BSR border mode on the PIM interface.
Designated Router - The Designated Router on the selected PIM interface
Neighbor Count - The number of PIM neighbors on the selected interface.
IP Address - The IP address of the PIM neighbor for this entry.
Up Time - The time since this PIM neighbor (last) became a neighbor of the local router.
Expiry Time - The minimum time remaining before this PIM neighbor will be aged out.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.
- 964 -
Advertisement
Table of Contents
