Bootp/Dhcp Relay Commands - Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual

Syntax
timers spf <delay-time> <hold-time>
Default Setting
delay-time—5
hold-time—10
Command Mode
Router OSPF Config Mode
8.4

BOOTP/DHCP Relay Commands

8.4.1 Show Commands
8.4.1.1 show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
Syntax
show bootpdhcprelay
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Maximum Hop Count: Is the maximum allowable relay agent hops.
Minimum Wait Time (Seconds) Is the minimum wait time.
Admin Mode Represents whether relaying of requests is enabled or disabled.
Server IP Address Is the IP Address for the BootP/DHCP Relay server.
Circuit Id Option Mode Is the DHCP circuit Id option which may be enabled or disabled.
Requests Received Is the number of requests received.
Requests Relayed Is the number of requests relayed.
Packets Discarded Is the number of packets discarded.
- 468 -