Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 724

will need to rejoin in order to maintain registration. An instance of this timer exists for each GARP
participant for each port. The Leave All Period Timer is set to a random value in the range of
LeaveAllTime to 1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to 60
seconds). The factory default is 1000 centiseconds (10 seconds).
11.3.12.2 Configuring the whole Switch GARP Configuration Page
It can take up to 10 seconds for GARP configuration changes to take effect.
!
Selection Criteria
GVRP Mode - Choose the GARP VLAN Registration Protocol administrative mode for the switch by
selecting enable or disable from the pull down menu. The factory default is disabled.
GMRP Mode - Choose the GARP Multicast Registration Protocol administrative mode for the switch
by selecting enable or disable from the pull down menu. The factory default is disabled.
Command Buttons
Submit - Update the switch with the values you entered. If you want the switch to retain the new
values across a power cycle you must perform a save.
- 724 -