Setup Options - Fortinet FortiSwitch 108F Series Quick Start Manual

Setup Options

GUI
Port 1
Ethernet Cable
1. Connect port 1 to the Management Computer
2. Enable DHCP or set the Management Computer's
Static IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
3. Visit https://192.168.1.99 in a web browser
4. Log in with the username admin
5. You can now configure your FortiSwitch
Note: After you log in for the first time, you will be prompted to set a new password
20
Management Computer
using the supplied Ethernet cable
IP and subnet to:
and no password
CLI
Console Port
Console Cable
1. Connect the Console Port with a Console Cable
Management Computer
2. Start a terminal program on the Management Computer
COM Port using the following default settings:
Baud rate:
115200
Data bits: 8
Parity:
None
Stop bits:
1
Flow control: None
3. Log in using username admin and no password
4. You can now configure your FortiSwitch
Note: After you log in for the first time, you will be prompted to set a new password
Serial Port
to the Serial Port on the
and select an available
21