Dell Force10 S4810P Reference Manual page 1621

Item
Master addr
Virtual addr(s)
Example (Brief)
FTOS>Interface Grp Pri Pre State Master addr Virtual addr(s)
Description----------------------------------------------------
--------
Gi 10/37 1 100 Y Master 200.200.200.200 200.200.200.201
Gi 10/37 2 100 Y Master 200.200.200.200 200.200.200.202
200.200.200.203 Description
Gi 10/37 3 100 Y Master 1.1.1.1 1.1.1.2
Gi 10/37 4 100 Y Master 200.200.200.200 200.200.200.206
200.200.200.207 ... short desc
Gi 10/37 254 254 Y Master 200.200.200.200 200.200.200.204
200.200.200.205
FTOS>
Usage The following describes the show vrrp command shown in the Example below.
Infromation
Item
GigabitEthernet
12/3...
State: master...
Hold Down:...
Adv rcvd:...
Description
• NA/IF (the interface is not available).
• MASTER (the interface associated with the MASTER router).
• BACKUP (the interface associated with the BACKUP router).
Displays the IP address of the MASTER router.
Displays the virtual IP addresses of the VRRP routers associated
with the interface.
Description
Displays the Interface, the VRRP group ID, and the network address.
If the interface is not sending VRRP packets, 0.0.0.0 appears as the
network address.
Displays the interface's state:
• Na/If (not available)
• master (MASTER virtual router)
• backup (BACKUP virtual router)
the interface's priority and the IP address of the MASTER.
This line displays additional VRRP configuration information:
• Hold Down displays the hold down timer interval in seconds.
• Preempt displays TRUE if preempt is configured and FALSE if
preempt is not configured.
• AdvInt displays the Advertise Interval in seconds.
This line displays counters for the following:
• Adv rcvd displays the number of VRRP advertisements
received on the interface.
• Adv sent displays the number of VRRP advertisements sent
on the interface.
1621