Dell Force10 S4810P Reference Manual page 1620

brief
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Usage The following describes the show vrrp brief command shown in the Example below.
Information
Item
Interface
Grp
Pri
Pre
State
1620
•
•
•
•
•
(OPTIONAL) Enter the keyword brief to view a table of information
on the VRRP groups on the E-Series.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Lists the interface type, slot and port on which the VRRP group is
configured.
Displays the VRRP group ID.
Displays the priority value assigned to the interface. If the track
command is configured to track that interface and the interface is
disabled, the cost is subtracted from the priority value assigned to
the interface.
States whether preempt is enabled on the interface.
•
•
Displays the operational state of the interface by using one of the
following:
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For Port Channel interface types, enter the keywords port-
channel followed by the number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale.
For SONET interfaces, enter the keyword sonet followed by
the slot/port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a VLAN interface, enter the keyword vlan followed by
the VLAN ID. The VLAN ID range is from 1 to 4094.
Y = Preempt is enabled.
N = Preempt is not enabled.