Show Vlt Counter - Dell Force10 S4810P Reference Manual
Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)
Hide thumbs
Also See for Force10 S4810P:
- Manual (60 pages) ,
- Quick start manual (27 pages) ,
- Configuration manual (1144 pages)
Table of Contents
Advertisement
show vlt counter
Displays the counter information.
Z-Series, S4810
Syntax
show vlt counter [arp| igmp-snoop | interface | mac]
Parameters
arp
igmp-snoop
interface
mac
Default
Not configured.
Command Modes
EXEC
Command History
Version 9.0.0.0
Version 8.3.12.0
Usage
If you do not add a parameter such as arp or mac, the output displays all of the counters.
Information
Example
FTOS# show vlt counter
Total VLT counters
-------------------------
L2 Total MAC-Address Count :
IGMP MRouter Vlans count :
IGMP Mcast Groups count :
ARP entries count :
Example (igmp-
FTOS# show vlt counter igmp-snoop
snoop)
Total IGMP VLT counters
----------------------
IGMP MRouter Vlans count : 1
IGMP Mcast Groups count
Example (igmp-
FTOS#show vlt counter igmp-snoop interface port-channel 2
snoop interface
VLT Port-ID: 2 IGMP Counter
-----------------------
port-channel)
IGMP MRouter Vlans count : 0
IGMP Mcast Groups count
FTOS# show vlt counter igmp-snoop interface port-channel 100
VLT Port-ID: 100 IGMP Counter
-----------------------
IGMP MRouter Vlans count : 1
Enter the keyword arp to display the ARP counter information for the
VLT.
Enter the keywords igmp-snoop to display the igmp-snooping
counter information for the VLT.
Enter the keyword interface to display the interface counter
information for the VLT.
Enter the keyword mac to display the MAC address counter
information for the VLT.
Introduced on the Z9000.
Introduced on the S4810.
: 5
: 5
1605
Advertisement
Table of Contents
