Clear Counters Vrrp Ipv6; Debug Vrrp Ipv6 - Dell Force10 S4810P Reference Manual

• track
• virtual-address

clear counters vrrp ipv6

Clear the counters recorded for IPv6 VRRP groups.
C-Series, E-Series, S-Series, S4810
Syntax clear counters vrrp ipv6 [vrid | vrf instance]
Parameters
vrid
vrf
Command Modes EXEC Privilege
Command History
Version 8.4.1.0
Version 8.3.10.0
Version 8.3.2.0

debug vrrp ipv6

Allows you to enable debugging of VRRP.
C-Series, E-Series, S-Series, S4810
Syntax debug vrrp ipv6 interface [vrid] {all | packets | state |
timer}
Parameters
interface
vrid
all
(OPTIONAL) Enter the number of an IPv6 VRRP group. The range is 1
to 255.
instance
(OPTIONAL) E-Series only: Enter the name of a VRF instance (32
characters maximum) to clear the counters of all IPv6 VRRP groups in
the specified VRF.
Introduced on E-Series ExaScale, C-Series, and S-Series. Support
was added for IPv6 VRRP groups in non-default VRF instances.
Introduced on the S4810.
Introduced on the E-Series TeraScale.
Enter the following keywords and slot/port or number information:
•
•
•
•
(OPTIONAL) Enter a number from 1 to 255 as the VRRP group ID.
Enter the keyword all to enable debugging of all VRRP groups.
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a Port Channel interface, enter the keywords port-
channel followed by a number. For the E-Series, the range
is 1 to 255 for TeraScale.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
For a VLAN interface, enter the keyword vlan followed by
the VLAN ID. The VLAN ID range is from 1 to 4094.
1627