Call Handling Commands - Toshiba STRATA CS Communication Server Release 6 User Manual

5.
Strata CS features you can map to Toshiba phone buttons
Several Strata CS commands are available to be mapped to a Toshiba digital phone's
programmable buttons. You can then press the button to activate the command. For instructions
on mapping a Strata CS feature to a phone button, including special instructions for certain
features, see the previous section.
The following Strata CS features are available:
18-14
using the Numbers and Extensions tab, see
page 12-3. To enter a custom dial string—for example, a Strata CS telephone
command beginning with * or #— click the Direct Dial tab and enter the dial string
in the field.
Direct dial
Click .
OK
Feature
Account Code
Call Forwarding
Call Menu
Do Not Disturb
Flash
Park/Unpark
Phone Page
Record Call
Release
Send to Voice Mail
"Using the Place Call To dialog box" on
Description
Lets you enter an account code for the call using
your telephone keypad.
Forwards your calls to a fixed destination
configured for that button. Pressing the button
also configures the call forwarding number.
Connects you to the telephone commands' call
handling menu. See
on page A-2.
Selects the Do Not Disturb personal status,
sending all calls directly to voice mail.
again makes you Available. See
Performs a Flash command, required for many
Strata CS telephone commands.
Parks the call so it can be retrieved from any
phone, or unparks a parked call.
Performs the *15 command to place a page or
intercom call.
Begins recording the call.
recording the call.
Disconnects the call. Note that if another line
appearance is ringing, hanging up the phone will
connect you to that line, so Release gives you a
way to hang up without taking the new call.
Sends the call to your voice mail.

"Call handling commands"

Pressing it
Chapter
Pressing it again stops
U G V
SER UIDE FOR
9.
P
IEW OINT