Toshiba STRATA CS Communication Server Release 6 User Manual page 91

3.
4.
Specifying options for a remote number
If you selected
box, where you can specify how Strata CS dials the number.
1.
2.
3.
4.
5.
C 8. U S
HAPTER SING
If you are using an external station (for example, your home phone) and forget your
station ID, enter 0 for the
your default station
Remote number. To use ViewPoint in conjunction with a phone that is not a Strata
CS station, select this field and enter the phone number or IP address of the phone.
As long as this ViewPoint session lasts, that phone will be the associated phone.
Click to choose advanced options for the number (see the next section,
"Specifying options for a remote number"
Choose this option to use ViewPoint without an associated phone.
None.
ViewPoint commands that require a phone—for example, placing a call—will be
unavailable.
In , type the network name of a Strata CS Server computer on your network, or
Server
click to select one.
Click .
OK
Remote number
Under , make sure the correct type of number is selected.
Address type
Under , either accept the default dialing service access code for the type of
Call Using
number selected, or click
system administrator can tell you what access codes are available.
Under
Country/Region
Under , make sure that the number is correct. The display bar shows the
Number
number as Strata CS will dial it after applying dialing rules.
To have Strata CS dial the number without applying dialing rules, uncheck
country code and area code dialing rules
a number that appears to be long-distance without adding the "1."
CS V P
TRATA IEW OINT
, click
Station ID
.
, you can click to open the Check Phone Number dialog
and enter a different access code. Your
This access code
, make sure that the correct country is selected.
. For example, you can have Strata CS dial
, then in the next window select
OK
).
Use
Use
8-5