Toshiba STRATA CS Communication Server Release 6 User Manual page 327

A F
PPENDIX
A F
PPENDIX
L
OGGING
S
WITCHES
You can add various switches to the command line that ViewPoint shortcut uses to start
ViewPoint. To change the command line, right-click ViewPoint shortcut icon, choose
Properties
Add switches to the end of the command line (after the quote mark) with a space before the
switch. You can add multiple switches separated by spaces. For example:
"C:\Program Files\Strata CS\Client\TVViewPoint.exe" /Server:Strata CS /station=77
The command line switches for ViewPoint are:
/allowmultiple
your computer.
/Server
ViewPoint against a specific Strata CS Server on your network. This is useful when you
want to have one ViewPoint session using a Server other than the one your ViewPoint
runs against by default.
/user /password /showloginoptions
/password:<password> /showloginoptions. Example: /user:Neil Pratt
/password:2112. (The three switches can be used separately.) Use to automatically log
on to ViewPoint as a specific user. With just /user and /password present, ViewPoint
skips the Logon dialog box. To have Strata CS still display the full Logon dialog
box—for example, to change phone information—add /showloginoptions.
/station
/stationconflict
/stationconflict:ignore. The ignore option lets you skip the Select Your Strata CS
Phone dialog box when launching ViewPoint with an associated phone other than your
default station (see
you use the ignore option without /stationusage, the default selection is owner (see
the next bullet).
/stationusage.
/stationusage:visitor. Lets you make a selection in the Select Your Strata CS Phone
dialog box as follows:
O
N WITH
, and then click the Shortcut tab. The
. Enables you to run multiple instances of ViewPoint at the same time on
. Syntax: /Server:<Servername>. Example: /Server:Strata CS. Runs
. See the next section.
. Syntax: /stationconflict:<ask/ignore>. Example:
"Using ViewPoint with a different phone or Server" on page
Syntax: /stationusage:<visitor/owner/forward>. Example:
/stationusage:visitor corresponds to
/stationusage:owner corresponds to
.
calls
C
OMMAND
field shows the command line.
Target
. Syntax: /user:<username>
Use station n as a visitor.
Use <this phone > to place and answer
-L
INE
8-4). If