Nbrstateshow - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

nbrStateShow

Displays the state of FSPF neighbors.
SYNOPSIS
nbrstateshow [slot/][port]
DESCRIPTION
Use this command to display information about fabric shortest path first (FSPF) neighbors to the local
switch or information about a neighbor to a specified port. FSPF defines a neighbor as a remote E_Port
interface that is directly attached to the local switch. However, if ports are trunked, the command displays
data only about the trunk master.
This command displays the following fields:
Local Domain ID
Local Port
Domain
Remote Port
State
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
slot
Fabric OS Command Reference
53-1002746-01
Domain ID of the local switch.
E_Port interface on the local switch. This value is typically equal to the Index field
reported in the switchShow command.
Domain ID of the remote switch.
E_Port interface on the remote switch.
State of the neighbor. The neighbor can be in one of the following five states:
0
NB_ST_DOWN - The neighbor is down.
1
NB_ST_INIT - The neighbor is initializing.
2
NB_ST_DB_EX - The neighbor and the switch are exchanging data from their
Link State Records (LSR) databases.
3
NB_ST_DB_ACK_WT -The neighbor is waiting for the switch to acknowledge the
LSR database.
4
NB_ST_DB_WT - The LSR Database is in waiting state; synchronization is in
process.
5
NB_ST_FULL - The neighbor is in the last, finishing state. The E_Port can route
frames only if the neighbor is in full state.
For bladed systems only, specify the slot number of the port to display, followed by
a slash (/).
2
nbrStateShow
549