Diagshow - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

diagShow

Displays diagnostics status.
SYNOPSIS
diagshow
[--slot number]
[-uports itemlist]
[-bports itemlist]
[-use_bports value]
DESCRIPTION
Use this command to display the diagnostics status for the specified list of blade or user ports.
NOTES
On 10 Gbps and 16 Gbps (Condor3-based) platforms, the following output fields display invalid values,
unless diagShow is executed while the spinFab or the portTest tests are running: "Speed", "FrTX",
"FrRX", "LLI Errs", "Loopback", "Total Diag Frames Tx" and "Total Diag Frames Rx".
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following optional operands:
--slot number
-uports itemlist
-bports itemlist
-use_bports value
EXAMPLES
To display diagnostic status on a switch blade:
SEE ALSO
itemList
Fabric OS Command Reference
53-1002746-01
Specify which slot to operate on. If this option is not specified, the default slot 0 is
used. The default slot is designed to operate on fixed-port-count products. By
default, this command displays information for all user ports in the system.
Specify a list of user ports.
Specify a list of blade ports.
If this value is nonzero, this command displays the diagnostics status for the blade
ports specified in -use_bports; otherwise, the command displays information for
the user ports specified in -uports. The default value is 0.
switch:admin> diagshow
Diagnostics Status:
Slot: 1 UPORTS
Port BPort Diag
0 15 OK
1 14 OK
2 13 OK
3 12 OK
4 31 OK
5 30 OK
6 29 OK
7 28 OK
8 47 OK
(output truncated)
Fri Feb 08 15:25:24 2002
Active Speed
UP 2G Auto
UP 2G Auto
UP 2G Auto
UP 2G Auto
UP 2G Auto
UP 2G Auto
UP 2G Auto
UP 2G Auto
UP 2G Auto
diagShow
......
......
......
......
......
......
......
......
......
......
2
239