Errdump - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

2

errDump

errDump
Displays the error log without pagination.
SYNOPSIS
errdump [--all]
errdump [--count number]
errdump [--reverse]
errdump [--severity severity]
errdump [--slot slotnum]
errdump [--attribute attribute]
errdump [--message msgID]
errdump [--help]
DESCRIPTION
Use this command to dump external error log messages without any page breaks. When executed
without operands, this command prints all error messages for the logical switch context in which the
command is executed.
The output of this command is unique for each control processor (CP). On dual CP systems this
command must be executed on each CP to obtain a complete record.
The following information is displayed in each message:
Start delimiter
Timestamp
Message ID
External sequence number
Security audit flag
Severity
Switch name
Message
End delimiter
254
Delimiter string for the start of a message.
Timestamp for the message.
Message identifier.
Sequence number for the message.
Security audit message displayed as AUDIT.
Severity of the message. Valid values include INFO, WARNING, ERROR, and
CRITICAL.
Switch name for the generator of this message, or "chassis".
Message body.
Delimiter string for the end of a message.
Fabric OS Command Reference
53-1002746-01