Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 699

EXAMPLES
To set the fabric ID of port 2/1 to 5 and the port ID format to core:
To configure port 2/0 to be an EX_Port and set the fabric ID to 4:
To disable fabric parameter negotiation on port 2/0 of an EX_Port:
To enable IDID on port 2:
To enable Brocade Network OS (NOS) fabric mode on port 1/5:
To view the configuration of an EX-Port:
SEE ALSO
portCfgVEXPort, portDisable, portEnable, portShow, portCfgDefault,
Fabric OS Command Reference
53-1002746-01
switch:admin> portcfgexport 2/1 -f 5 -p 1
switch:admin> portcfgexport 2/0 -a 1 -f 4
switch:admin> portcfgexport 2/0 -t 2
switch:admin> portcfgexport 2 -i 1
switch:admin> portcfgexport 1/5 -a 1 -m 5
switch:admin> portcfgexport 1/5
Port 1/5 info
Admin:
State:
Pid format:
Operate mode:
Edge Fabric ID:
Preferred Domain ID:
Front WWN:
Fabric Parameters:
R_A_TOV:
E_D_TOV:
Authentication Type: DHCHAP
DH Group: 4
Hash Algorithm: SHA-1
Encryption: ON
Compression: ON
Forward Error Correction: ON
Edge fabric's primary wwn: N/A
Edge fabric's version stamp: N/A
enabled
OK
core(N)
Brocade Native
128
160
50:00:51:e4:44:40:0e:80
Auto Negotiate
10000(N)
2000(N)
2
portCfgEXPort
fcrBcastConfig
671