Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 390

2
ficonCupShow
MIHPTO
DD_LOG
diag_info
hlthchk_log
LP
EXAMPLES
To display the FMS mode for the switch:
To display the mode register for the switch:
To display the ASM bit in the mode register for the switch:
To display the MIHPTO value for the CUP:
To display the logical paths for the switch:
362
Displays the FICON-CUP missing interrupt handler primary timeout (MIHPTO)
value in seconds.
Displays the latest Director Diagnostics Log.
Displays dignostic information for the logical switch such as whether Diagnostic
Interval has been set for CUP Diagnostics (if so, then Statistics Sampling is
running), along with additional information about Statistics Sampling by the CUP,
the detected CUP Diagnostic capabilities and settings for other switches in the
fabric..
Displays the HealthCheck Logs for the logical switch. It displays Sense Data
returned to the FICON host for Asynchronous Error Reporting events generated
by the CUP for Congestion, Latency, or Port Fencing events which have been
detected by the switch.
Displays the logical paths on the switch. For each entry, the command displays
the port identifier (PID), the LPAR identifier (CHID), reporting state (operational or
reset (=nonoperational)), and reporting path state (current or alternate).
switch:user> ficoncupshow fmsmode
fmsmode for the switch: Enabled
switch:user> ficoncupshow modereg
POSC UAM ASM DCAM
------------------------------
1 0 1 1
switch:user> ficoncupshow modereg ASM
ASM
---
1
switch:user> ficoncupshow MIHPTO
MIHPTO for the CUP: 60 seconds
switch:user> ficoncupshow LP
FICON CUP Logical Paths for CUP 0x08FE00
LP Reporting
PID CHID State
------ ---- ----
082300 1A Oper***
082300 1B Oper
ACP HCP
1 0
Path
------
Curr
Fabric OS Command Reference
53-1002746-01