Configshow - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

configRemove
Deletes a saved configuration file.
SYNOPSIS
configremove -local | -USB | -U [file]
DESCRIPTION
This command deletes a configuration file that was previously saved to the local chassis or to an
attached USB device by using the configUpload command.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
-local
-USB | -U
file
EXAMPLES
To remove a configuration file from the local chassis:
To remove a configuration file from an attached USB device without specifying a filename:
SEE ALSO
configDownload, configUpload, configList,
Fabric OS Command Reference
53-1002746-01
Removes a configuration file that was previously created by configUpload -local
from the local chassis.
Removes a configuration file that was previously created by configUpload -USB
from an attached USB device.
Specifies the configuration file to be removed. If the file option is omitted, the
command prompts for a file name.
switch:admin> configremove -local first_config.txt
switch:admin> configremove -USB
File Name [config.txt]: second_config.txt

configShow

2
configRemove
147