Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 1070

2
sysMonitor
To display current temperature values:
To configure Fabric Watch custom thresholds for flash memory:
To apply the custom thresholds for flash memory:
To display the Fabric Watch configuration for flash memory:
1042
Buffer:
Custom:
Value
Default:
Value
switch:admin> sysmonitor --show env -area temp -c
Class |Area |Index|Value
------|------|------|------|------------------
ENV |TEMP |000001|39
ENV |TEMP |000002|35
ENV |TEMP |000003|42
ENV |TEMP |000004|44
switch:admin> sysmonitor --config resource -area flash
-highthreshold -value 100
switch:admin> sysmonitor --apply resource -area
flash -thresh_level cust
switch:admin> sysmonitor --show resource
Class: RESOURCE
Area : FLASH
ThLevel : Cust
ActLevel: Cust
High :
Custom:
TimeBase: None
Value
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog
Default:
TimeBase: None
Value
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog
Low:
Custom:
TimeBase: None
Value
Trigger : Above Action: None
Trigger : Below Action: Raslog,SNMP
Default:
TimeBase: None
Value
Trigger : Above Action: None
Trigger : Below Action: Raslog,SNMP
Buffer:
Custom:
Value
Default:
Value
: 10
: 10
|State | Monitoring
|InRange|Continue
|InRange|Continue
|InRange|Continue
|InRange|Pause
: 100
: 90
: 0
: 0
: 0
: 0
\
\
Fabric OS Command Reference
53-1002746-01