2
fcrProxyConfig
If no proxy device WWN is stored in any slot for all edge fabrics, the following message is displayed: "All
slots empty."
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
-s importedFID devWWN slot
-r importedFID devWWN
EXAMPLES
To display the persistent proxy device configuration:
To persistently configure device WWN 00:11:22:33:44:55:66:77 to use slot f101h in fabric 5:
To remove device WWN 00:11:22:33:44:55:66:77 from its persistent slot in fabric 5:
SEE ALSO
fcrPhyDevShow, fcrProxyDevShow, fcrXlateConfig, lsanZoneShow,
340
Adds the specified devWWN (format: xx:xx:xx:xx:xx:xx:xx:xx) to the specified slot
(format XXYYH, where XX is the translate domain area_ID [F0H through FFH]
and YY is the port_ID [01H through 7FH]) for the edge fabric specified (1 through
128). The following messages may be displayed:
•
"WWN does not exist in any proxy device slot." The WWN does not exist in
any slot for the specified edge fabric.
•
"Too many proxy slots configured. Remove some unused proxy device
WWNs from their slots using the -r operand and try again." All slots are used
for the specified edge fabric.
•
"The specified slot already contains a WWN, overwrite? [y]" The specified slot
already contains an entry. You are then prompted for confirmation.
Removes the specified devWWN (format: XX:XX:XX:XX:XX:XX:XX:XX) from its
slot for the edge fabric specified by importedFID (1 through 128). If the WWN
does not exist in any slot for the specified edge fabric, the following message is
displayed: "WWN does not exist in any proxy device slot."
switch:admin> fcrproxyconfig
Imported FID
Device WWN
002
50:05:07:65:05:84:08:d7
002
50:05:07:65:05:84:0a:7b
002
22:00:00:20:37:c3:11:71
002
22:00:00:20:37:c3:1a:8a
003
10:00:00:00:c9:2b:6a:2c
switch:admin> fcrproxyconfig -s 5
00:11:22:33:44:55:66:77 f101
switch:admin> fcrproxyconfig -r 5
00:11:22:33:44:55:66:77
WWN deleted from proxy device slot
Slot
f001
f002
f001
f002
f001
\
\
switchShow
Fabric OS Command Reference
53-1002746-01
Need help?
Do you have a question about the StoreFabric SN6500B and is the answer not in the manual?