Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 745

To display the inband management interface for a single GbE Port on a Brocade 7800:
To display the management route for a configured inband management interface on a Brocade 7800:
SEE ALSO
portCfg, portCfgAutoDisable, portCfgCreditRecovery, portCfgEport, portCfgFec, portCfgGport,
portCfgLongDistance, portCfgLport, portCfgNPIVPort, portCfgOctetSpeedCombo, portCfgSpeed,
portCfgTrunkPort, portSwapDisable, portSwapShow,
Fabric OS Command Reference
53-1002746-01
switch:admin> portcfgshow fciptunnel 1/12
-------------------------------------------
Tunnel ID: 1/12
Tunnel Description:
Compression: Off
Fastwrite: Off
Tape Acceleration: Off
TPerf Option: Off
IPSec: Enabled (legacy)
QoS Percentages: High 50%, Med 30%, Low 20%
Remote WWN: Not Configured
Local WWN: 10:00:00:05:1e:52:fe:00
Flags: 0x00000000
FICON: Off
switch:admin> portcfgshow mgmtif ge0
Inband Management: ge0 Enabled
Interface IPv4 Address
--------------------------------------------------------------
0 20.20.0.151
Flags: U=Up B=Broadcast D=Debug L=Loopback P=Point2Point R=Running
N=NoArp PR=Promisc M=Multicast S=StaticArp LU=LinkUp
switch:admin> portcfgshow mgmtroute ge0
Port: ge0
IP Address Mask
-------------------------------------------------------------
192.168.1.0 255.255.255.0
Flags: U=Usable G=Gateway H=Host C=Created(Interface) S=Static
L=LinkLayer(Arp)
NetMask Effective MTU
255.255.255.0 1500
Gateway
20.20.1.250
switchShow
portCfgShow
Flags
Metric Flags
0
2
717