Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 561

lsAge
reserved
type
options
lsId
advertiser
incarn
length
chksum
linkCnt
flags
LinkId
out port
rem port
cost
costCnt
type
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
domain
Fabric OS Command Reference
53-1002746-01
Age, in seconds, of this LSR. An LSR is removed from the database when its age
exceeds 3,600 seconds.
Reserved for future use.
Type of the LSR. Always 1.
Always 0.
ID of this LSR. It is identical to the domain ID.
Domain ID of the switch that originated this LSR.
Incarnation number of this LSR.
Total length, in bytes, of this LSR. Includes header and link state information for all
links.
Checksum of total LSR, with exception of lsAge field.
Number of links in this LSR. Each link represents a neighbor in NB_ST_FULL
state.
Always 0.
ID of this link. It is the domain ID of the switch on the other side of the link.
Port number on the local switch.
Port number of the port on the other side of the link.
Cost of this link. The default cost for a 1 Gbps link is 1,000.
Always 0.
Always 1.
Specifies the domain ID of the LSR to be displayed. This operand is optional; if
omitted, the entire link state database is displayed.
2
lsDbShow
533