Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 664

2
portCfg
To delete an IP interface for a failover crossport:
To create a static IP route using an IPv4 destination address, a netmask, and a gateway address:
To create a static IP route using IPv6:
To create an IP route for a failover crossport on a Brocade FX8-24:
1.
636
switch:admin> portcfg ipif 8/xge0 delete 192.168.11.20 -x
Operation Succeeded
switch:admin> portcfg iproute ge0 create
192.42.0.0 255.255.255.0 192.168.0.250
Operation Succeeded
switch:admin> portcfg iproute ge0 create
2010::/64 2000::1:250
Operation Succeeded
switch:admin> portshow iproute ge0
Port: ge0
IP Address Mask
-------------------------------------------------------------
192.42.0.0 255.255.255.0
192.168.0.0 255.255.255.0
192.168.0.10 255.255.255.255 *
192.168.0.11 255.255.255.255 *
192.168.0.21 255.255.255.255 *
192.168.0.250 255.255.255.255 *
IPv6 Address Len
------------------------------------------------------------
2000:: 64
2000::10 128
2000::11 128
2000::1:250 128
2001:: 64
fe80:: 64
ff01:: 32
ff02:: 32
Flags: U=Usable G=Gateway H=Host C=Created(Interface) S=Static
L=LinkLayer(Arp)
Configure the iproute for the local XGE port (xge0).
switch:admin> portcfg iproute 8/xge0 create 2.2.2.0 \
255.255.255.0 192.168.11.250
Operation Succeeded
\
\
Gateway
192.168.0.250
*
Gateway
*
*
*
*
2000::1:250
*
*
*
Metric Flags
0 U G
0 U C
0 U H L
0 U H L
0 U C
0 U H L
Metric Flags
0 U C
0 U H L
0 U H L
0 U H L
0 U G
0 U C
0 U C
0 U C
Fabric OS Command Reference
53-1002746-01