To display a single circuit (circuit 0 on tunnel 16) with VLAN tagging configuration:
Fabric OS Command Reference
53-1002746-01
Remote IP: 192.168.12.200
Local IP: 192.168.12.100
Metric: 0
Min Comm Rt: 2500000
Max Comm Rt: 2500000
SACK: On
Min Retrans Time: 100
Max Retransmits: 8
Keepalive Timeout: 10000
Path MTU Disc: 0
VLAN ID: (Not Configured)
L2CoS: (VLAN Not Configured)
DSCP:
F:
0 H:
Flags: 0x00000000
-------------------------------------------
Circuit ID: 1/12.1
Circuit Num: 1
Admin Status: Enabled
Oper Status: Up
Connection Type: Initiator
Remote IP: 192.168.12.201
Local IP: 192.168.12.101
Metric: 1
Min Comm Rt: 2500000
Max Comm Rt: 2500000
SACK: On
Min Retrans Time: 100
Max Retransmits: 8
Keepalive Timeout: 10000
Path MTU Disc: 0
VLAN ID: (Not Configured)
L2CoS: (VLAN Not Configured)
DSCP:
F:
0 H:
Flags: 0x00000000
-------------------------------------------
Circuit ID: 1/21.0
Circuit Num: 0
Admin Status: Enabled
(Output truncated)
switch:admin> portshow fcipcircuit 16 0
-------------------------------------------
Circuit ID: 16.0
Circuit Num: 0
Admin Status: Enabled
Oper Status: In Progress
Connection Type: Default
Remote IP: 192.168.2.20
Local IP: 192.168.2.10
Metric: 0
Min Comm Rt: 2500000
Max Comm Rt: 2500000
SACK: On
Min Retrans Time: 100
Max Retransmits: 8
Keepalive Timeout: 10000
0 M:
0 L:
0
0 M:
0 L:
0
2
portShow
821
Need help?
Do you have a question about the StoreFabric SN6500B and is the answer not in the manual?