Fcredgeshow - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

fcrEdgeShow

Displays the FIDs of all configured EX_Ports.
SYNOPSIS
fcredgeshow
fcredgeshow [-fid FabricID]
fcredgeshow --help
DESCRIPTION
Use this command without operand to display information about all Fabric IDs (FIDs) that have been
created on the chassis and are assigned to EX_Ports.
When a FID is specified, fcredgeshow displays information for all EX_Ports configured with the
specified FID.
For each FID, the command output includes the following:
FID
EX-port
E_Port
PWWN
SWWN
Flags
The command output depends on the EX_Port configuration:
•
•
•
•
OPERANDS
This command has the following operands:
-fid FabricID
--help
Fabric OS Command Reference
53-1002746-01
Fabric ID of the EX_Port.
EX_Port number of the switch.
Port number for the remote E_Port.
Neighbor switch port WWN.
Neighbor switch WWN.
encryption, compression and fec features
If the EX_Port is online, the command displays the FID, the EX_Port to which it is assigned, the
E_Port, the port WWN, the switch WWN and Port flags.
If the EX_Port is offline, the command displays the FID, the EX_Port to which it is assigned, and an
"OFFLINE" message.
IF no EX_Ports are configured in the switch, the command displays "No EX-port Configured".
If no EX_Ports are configured within the specified FID, the command displays the following
message: "No EX-ports with FID FabricID."
Specifies the FID for which to display the configured EX_Ports.
Displays the command usage.
2
fcrEdgeShow
325