Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 767

To terminate the D_Port test on a single port:
To display the runtime status for a single D_Port while the test is in progress:
To display D_Port summary information:
SEE ALSO
dataTypeShow, fabricLog, portCfg, portCfgDPort, portShow,
Fabric OS Command Reference
53-1002746-01
switch:admin> portdporttest --stop
switch:admin> portdporttest --show 42
D-Port Information:
==============================================
Port: 42
Remote WWNN: 10:00:00:05:1e:e5:e4:00
Remote port: 343
Mode: Manual
No. of test frames: 12 Million
Duration of test (HH:MM):00:01
Test frame size: 1024 Bytes
Payload Pattern: JTSPAT
FEC (enabled/option/active): Yes/No/No
CR (enabled/option/active): No/No/No
Start time: Mon Jan 16 05:57:52 2012
End time: Mon Jan 16 05:58:56 2012
Status: PASSED
===================================================================
Test Start time
===================================================================
Electrical loopback 05:57:52
Optical loopback 05:58:07
Link traffic test 05:58:14
====================================================================
Roundtrip link latency: 934 nano-seconds
Estimated cable distance: 1 meters
Buffers required: 1 (for 1024 byte frames at 16Gbps speed)
switch:admin> portdporttest
Port State SFP Capabilities
=============================================
24 ONLINE E,O
26 ONLINE E,O
33 OFFLINE ---
Result EST(HH:MM:SS)
PASSED --------
PASSED --------
PASSED --------
--show all 42
Test Result
PASSED
RESPONDER
RESPONDER
switchShow
2
portDPortTest
Comments
----------
----------
----------
739