2
portStats64Show
swConnUnitStopTenancyStarvation, Starve_stop
swConnUnitOpend, opened
swConnUnitTransferConnection, transfer
swConnUnitOpen, open
swConnUnitInvalidARB, er_inv_arb
The following counters are platform-specific and applicable only to Condor2 and Goldeneye2 ASICs only.
Refer to the Fabric OS Troubleshooting and Diagnostics Guide, Appendix A, for a table that correlates
ASIC type with switch models.
swConnUnitFTB1Miss, er_type1_miss
swConnUnitFTB2Miss, er_type2_miss
swConnUnitFTB6Miss, er_type6_miss
swConnUnitZoneMiss, er_zone_miss
swConnUnitLunZoneMiss, er_lun_zone_miss
swConnUnittStatRxMulticastToObjects, stat_mc_to
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
This command is not supported on FCoE ports.
OPERANDS
This command has the following operands:
slot
port
-long
EXAMPLES
To display the 64-bit hardware statistics for a port:
840
Number of loop tenancies stopped due to starvation.
Number of times the FL_Port entered OPENED state.
Number of times the FL_Port entered TRANSFER state.
Number of times the FL_Port entered OPEN state.
Number of invalid arbitrated loops (ARBs).
The number of FCR frames with transmit errors.
The number of frames with routing errors.
The number of FCR frames with receive errors.
Number of frames with hard zoning miss
Number of frames with logical unit number (LUN) zoning miss.
The number of multicast timeouts.
For bladed systems only, specify the slot number of the port to be displayed,
followed by a slash (/).
Specify a port number to be displayed, relative to its slot for bladed systems. Use
switchShow to display a list of valid ports.
Displays the counters as one single 64-bit number. This operand is optional; if
omitted, the lower and upper 32-bits are reported as two separate numbers.
switch:user> portstats64show 4/15
stat64_wtx
0
top_int : 4-byte words transmitted
21618 bottom_int : 4-byte words transmitted
stat64_wrx
0
top_int : 4-byte words received
22492 bottom_int : 4-byte words received
Fabric OS Command Reference
53-1002746-01
Need help?
Do you have a question about the StoreFabric SN6500B and is the answer not in the manual?
Questions and answers