Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 167

OPERANDS
This command has the following operands:
-fid FID
-all
-switch
EXAMPLES
To restore all system configuration parameters to default values:
SEE ALSO
snmpConfig, configure, configureChassis, switchDisable,
Fabric OS Command Reference
53-1002746-01
Specifies the Fabric ID of the logical switch for which to reset the configuration.
This operand is valid only in Virtual Fabric mode, and the executing account must
have chassis permissions.
Restores all nonpersistent configuration parameters to factory default values
(switch and chassis parameters). This command requires chassis permissions.
Resets the switch configuration only. This operand is not valid in VF mode.
switch:admin> configdefault -all
Executing configdefault...Please wait
Setting the default config: FID = 128 Switch Name =stinger78
Already in Native Mode continuing with configDefault
Committing configuration ... done.
The switch has to be rebooted to allow the changes to take effect.
Do you want to reboot the system (y/n) [y]: y
configDefault
switchEnable
2
139