Portalpashow - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

portAlpaShow

Displays the Arbitrated Loop Physical Addresses (AL_PAs) of devices attached to a port.
SYNOPSIS
portalpashow [slot/]port
DESCRIPTION
Use this command to display the AL_PAs of devices connected to a port, and whether these devices are
public or private. If the specified port is not an active FL_Port or if no AL_PAs are present, this command
prints an error.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
slot
port
EXAMPLES
To display the AL_PAs of a port:
SEE ALSO
switchShow
Fabric OS Command Reference
53-1002746-01
For bladed systems only, specify the slot number of the port to display, followed by
a slash (/).
Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports.
switch:user> portalpashow 4/14
AL_PA type AL_PA
0xe2 public 0xe4
type AL_PA type
public
2
portAlpaShow
621