Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 429

To enable port 5/0 on all logical switches:
To display the firmware version for all logical switches:
Fabric OS Command Reference
53-1002746-01
Default Switch: No, Address Mode 0]
Index Slot Port Address Media Speed State
===================================================
0 1 0 640000
1 1 1 640100
2 1 2 640200
switch:admin> fosexec --fid all -cmd "portenable 5/0"
---------------------------------------------------
"portenable" on FID 128:
---------------------------------------------------
"portenable" on FID 10:
A port or ports is/are not part of this switch.
---------------------------------------------------
"portenable" on FID 20:
A port or ports is/are not part of this switch.
switch:user> fosexec --fid all -cmd "firmwareshow -v"
LF permission does not exist for one or more \
logical switches.
Would you like to continue [Y/N] : y
------------------------------------------
"firmwareshow" on FID 10:
Appl Primary/Secondary Versions
------------------------------------------
FOS v7.0.0
v7.0.0
------------------------------------------
"firmwareshow" on FID 20:
Appl Primary/Secondary Versions
------------------------------------------
FOS v7.0.0
v7.0.0
-- N8 No_Module
-- N8 No_Module
-- N8 No_Module
fosExec
Proto
FC
FC
FC
2
401