Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 496

2
ipAddrSet
To delete the IPv4 address for the IPFC interface associated with a logical switch with Virtual Fabric ID
67:
To configure an IPv4 FC address for the IPFC interface associated with a switch that is not in Virtual
Fabric mode:
To verify the changes:
To set the IPv4 address details for a switch chassis in interactive mode:
To enable DHCP on a standalone, non-AP platform:
To enable DHCPv6 on a device:
SEE ALSO
ipAddrShow
468
Ethernet IP Address: 10.32.220.11
Ethernet Subnetmask: 255.255.240.0
Host Name: cp0
Gateway IP Address: 10.32.208.1
CP1
Ethernet IP Address: 10.32.220.12
Ethernet Subnetmask: 255.255.240.0
Host Name: cp1
Gateway IP Address: 10.32.208.1
IPFC address for logical fabric ID 128: 1.2.3.4/24
Backplane IP address of CP0 : 10.0.0.5
Backplane IP address of CP1 : 10.0.0.6
switch:admin> ipaddrset -ls 67 --delete
IP address is being changed...Done.
switch:admin> ipaddrset -ls 128 --add 10.32.72.70/24
IP address is being changed...Done.
switch:admin> ipaddrshow
SWITCH
Ethernet IP Address: 10.32.72.9
Ethernet Subnetmask: 255.255.240.0
Gateway IP Address: 10.32.64.1
DHCP: Off
IPFC address for virtual fabric ID 128: 10.32.72.70/24
switch:admin> ipaddrset -chassis
Ethernet IP Address [192.168.166.148]:
Ethernet Subnetmask [255.255.255.0]:
Committing configuration...Done.
switch:admin> ipaddrset
Ethernet IP Address [192.168.74.102]:
Ethernet Subnetmask [255.255.255.0]:
Gateway IP Address [192.168.74.1]:
DHCP [Off]: on
switch:admin> ipaddrset -ipv6 -dhcpv6
Fabric OS Command Reference
53-1002746-01