Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 911

--set -log MSG-ID
--show -disabled
--show -log MSG-ID
--show -module MODULE-ID
--show -severity MSG-ID
--show -all
EXAMPLES
To disable logging of a single message:
To re-enable logging of a single message that was previously disabled:
To disable logging of all messages that belong to the NSM module:
To re-enable logging of all messages that belong to the NSM module:
To change the severity level of a RASlog message:
To display a list of all messages that have been disabled:
Fabric OS Command Reference
53-1002746-01
Changes the default severity level of the specified message.
-severity value
Specifies a new severity level for the message. Valid values include INFO,
WARNING ERROR CRITICAL, and DEFAULT.
Displays all messages that have been disabled.
Displays the logging status of the specified message.
Displays the logging status of all messages included in the specified module.
Displays the severity of the specified messages.
Displays all external RASlog messages, their status (enabled or disabled), their
configured severity and their default severity.
switch:admin> rasadmin --disable -log NSM-1009
2012/07/20-13:30:41, [LOG-1005], 378, SLOT 4 | CHASSIS, INFO,
PLUTO_25, Log message NSM-1009 has been disabled.
switch:admin> rasadmin --enable -log NSM-1009
2012/07/20-13:30:41, [LOG-1005], 378, SLOT 4 | CHASSIS, INFO,
PLUTO_25, Log message NSM-1009 has been enabled.
switch:admin> rasadmin --disable -module NSM
2012/07/20-13:28:37, [LOG-1007], 375, SLOT 4 | CHASSIS, INFO,
PLUTO_25, Log Module NSM has been disabled.
switch:admin> rasadmin --enable -module NSM
2012/07/20-13:28:37, [LOG-1007], 375, SLOT 4 | CHASSIS, INFO, PLUTO_25,
Log Module NSM has been enabled,
switch:admin> rasadmin --set -log
Message Severity
SEC-1203: WARNING
switch:admin> rasadmin --show disabled
Message Status
IPAD-1002 DISABLED
IPAD-1003 DISABLED
SEC-1203 -severity WARNING
Default Severity Current Severity
INFO INFO
INFO INFO
2
rasAdmin
883