Portlogpdisc - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

Brocade fabric os command reference v7.1.0 (53-1002746-01, march 2013)

Hide thumbs Also See for StoreFabric SN6500B:

Table of Contents

portLogPdisc

Sets or clears the debug_pdisc_flag.

portlogpdisc 0 | 1

Use this command to set or clear the debug_pdisc_flag. This command is part of the environmental

monitor. A setting of 1 enables logging of Port Discovery parameters. The PDISC log is disabled by

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

This command has the following operand:

To set the debug_pdisc_flag:

Table of Contents

Do you have a question about the StoreFabric SN6500B and is the answer not in the manual?

Fabric os v7.1.0