Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 332

2
fcoeLoginGroup
--add
--remove
--rename
EXAMPLES
To create a login group:
To add a VN_Port device to the login group:
To remove a VN_Port device from the login group:
To delete a login group:
SEE ALSO
fcoeLoginCfg
304
lgname
Specifies the name of the login group.
Adds VN_Port devices to the login group.
lgname
Specifies the name of the login group to which VN_Port devices are to be added.
member
Identifies the WWN of the VN_Port. The WWN must be specified in hex as
xx.xx.xx.xx.xx.xx.xx.xx. If more than one member is specified, members must be
separated by a semicolon. Only specified members are allowed to log in to the
switch.
Removes VN_Port devices from the login group.
lgname
Specifies the name of the login group from which VN_Port devices are to be
removed.
wwn
Identifies the WWN of the VN_Port. The WWN must be specified in hex format as
xx.xx.xx.xx.xx.xx.xx.x. Only specified members are allowed to log in to the switch.
Renames the specified login group. The following operands are required:
lgname
Specifies the current name of the login group.
newlgname
Specifies the new name for the login group.
switch:admin> fcoelogingroup --create mylg
-self"12:23:34:45:56:67:78:89"
switch:admin> fcoelogingroup --add \
mylg "12:00:00:00:00:00:1e:34"
switch:admin> fcoelogingroup --remove \
mylg "12:00:00:00:00:00:1e:34"
switch:admin>fcoelogingroup --delete mylg
\
Fabric OS Command Reference
53-1002746-01